Red-y Smart Mass flow controller, Vögtlin

Vögtlin gas mass flow controllers and meters use a CMOS sensor, which makes the measurement and control response time very fast (150ms with the controller and 50ms with the meter). In addition, the measurement is very accurate up to ± 0.3% of full range + ± 0.5% of reading and turndown 1: 100. The warm-up time of the CMOS sensor is also short (less than 1s), so the Mass Flow Controller achieves full accuracy very quickly. The Smart series has both analog and digital communication and RS485 and Modbus RTU as standard, so the controller is easy to control directly from a computer. The mass flow controller uses a tightly closing control valve with a leakage value of less than 1x10 -6 mbar l / s He. The controller is also available with a local display as well as a display with pushbuttons that can be used to change the setpoint locally. Each mass flow controller is calibrated separately with the gas used in the application. One meter can be calibrated with up to ten different gases. Get red-y software for mass flow controllers and meters is available free of charge.

Features:

• Accurate measurement and adjustment in the standard model ± 1% of the total range (turn down 1:50) or High performance model ± 0.3% of the full range + 0.5% of the measurement reading (turn down 1: 100).
• Output signal: (analog) 0-20mA, 4-20mA, 0-5V, 1-5V, 0-10V or 2-10V
• Output messages: (digital) RS485 Modbus RTU, Lab View-Vls, Profibus DP-V0, DP-V1, Profinet RT, EtherCAT
• Variations in pressure and temperature do not significantly affect the measurement
• The controllers are calibrated with the same gas as in the application and this ensures high accuracy
• Large selection of accessories: VCR vacuum connectors, cables, crimp connectors, filters cables, etc ...
• Calibration can be traced to the METAS Standard (Federal of metrology Switzerland)
• Fast response time (with controller 150ms and with meter 50ms)
• Leak tight (leakage value is less than 1x10 -6 mbar l / s He)
• Available on the local display and the controller also available on the display with pushbuttons that can be used to change the setpoint
• Analog and digital message in the same controller
• 3D CAD data file available
• Available material certificate 3.1
• Swiss quality and the product has a 3-year warranty
• Get red-y software available for free
• View flow and temperature
• Change the setpoint
• Select the gas to be measured
• Visualization of measured values
• Changing the measuring range
• Optional: data logging, gas mixing, adjustment / calibration
• Get red-y software available for free

Product Video